The H-beam is the backbone of modern steel-framed buildings, bridges and industrial structures. Its wide, parallel flanges and efficient cross-section carry bending and axial loads with minimal weight. Huaxia-Steel supplies carbon steel H-beams in standard and custom sizes, cut, drilled and finished to project requirements. Here is the specification and supply scope.
Product Overview
An H-beam (also called wide-flange beam, W-shape) has flanges of equal width and roughly equal thickness, giving it the “H” profile. Compared with I-beams, H-beams have wider, more parallel flanges and higher strength-to-weight, which is why they dominate column and long-span applications. We supply both standard sections and fabricated members.
Standard Sizes and Weight
| Designation | Depth (mm) | Flange (mm) | Web (mm) | Weight (kg/m) |
|---|---|---|---|---|
| H100×100 | 100 | 100 | 6 | 17.2 |
| H150×150 | 150 | 150 | 7 | 31.9 |
| H200×200 | 200 | 200 | 8 | 50.5 |
| H300×300 | 300 | 300 | 10 | 94.0 |
| H400×400 | 400 | 400 | 13 | 172.0 |
Tolerance
Dimensions, straightness and camber follow the relevant standard’s tolerance class, typically ±2 mm on depth and ±3 mm on overall length for cut pieces. Lengths are supplied in mill lengths (6–12 m) or cut-to-length with sawn or flame-cut ends.
Available Grades
- ASTM A36 / A992 (USA building structures)
- EN 10025-2 S235JR / S355JR (European)
- JIS G3101 SS400 (Japanese)
- GB/T 11263 Q235B / Q355B (Chinese)
Manufacturing Standards
Our H-beams are produced to ASTM A6/A6M and A992, or to EN 10034 / JIS G3192 depending on the destination market. Each heat is documented with a mill test certificate, and S355JR / A992 grades carry the required impact testing.
Applications
- Building columns and beams in steel-frame towers
- Bridge girders and portal frames
- Industrial workshops and warehouses
- Crane rails and heavy equipment supports
Quality Assurance
ISO 9001-controlled rolling, with ultrasonic testing available for heavy sections, surface and dimensional inspection, and 3.1/3.2 MTC. Third-party inspection (SGS, BV, TÜV) is available on request.
Packaging & Shipping
H-beams are bundled with steel strapping, tagged with heat numbers, and loaded under supervision with dunnage to prevent contact damage. Export shipment is available FOB, CFR or CIF worldwide.
Get a Mill-Direct Quote on Carbon Steel
Huaxia-Steel supplies the full range of carbon steel products with mill test certificates, third-party inspection and worldwide export. Tell us your grade, size and quantity — we respond within one business day.
H-Beam vs I-Beam
Although the terms are often used loosely, an H-beam has parallel, equal-width flanges and a more uniform web, giving better strength distribution and easier connection. An I-beam (S-shape) has tapered flanges and is generally lighter and used for lighter spans. For primary columns and long spans, H-beams are usually specified; for secondary members, I-beams may suffice. Confirm the section type on the drawing before ordering.
Fabrication Services
Beyond supply, Huaxia-Steel offers cutting to length, punching, drilling, welding of stiffeners and end-plate connection preparation so members arrive site-ready. Pre-fabrication reduces on-site labour and waste, and CNC detailing ensures holes and cuts match the connection design. Send us your fabrication drawings for a bundled, ready-to-erect delivery.
Storage and Handling Notes
H-beams should be stacked on level supports with stickers between layers to prevent distortion, and stored off the ground in a drained yard. Bundles are tagged with heat numbers for traceability. For export, ends are protected and bundles are strapped and separated to survive long transit without contact damage.
Quality Control in Rolling
H-beam rolling is controlled under ISO 9001 with continuous dimensional monitoring of flange width, web thickness, depth and camber. Ultrasonic testing is available for heavy sections and for fracture-critical or seismic applications, and each heat is chemically analysed and mechanically tested. Straightness and twist are checked against the standard’s tolerance class, and surface defects such as laps or scabs are dressed before dispatch. This disciplined control is what lets fabricators cut, drill and weld members without surprises on the shop floor.
Choosing the Right Section
Selecting an H-beam starts with the load and span: heavier loads and longer spans need deeper, heavier sections. The engineer then checks deflection, buckling and connection capacity, often choosing a standard designation from the relevant national table. For columns, compact and symmetric sections resist bi-axial bending; for beams, the strong axis carries the main moment. When in doubt, share your load summary with us and we will recommend a cost-effective section and confirm availability.
Worldwide Delivery
Huaxia-Steel exports H-beams in mill lengths or cut-to-length, bundled, tagged and protected for ocean transit. We coordinate container or break-bulk shipment, prepare full customs documentation, and can deliver to port or site under FOB, CFR or CIF terms. For large projects we phase deliveries to match your erection schedule, reducing site inventory and double-handling. Our goal is ready-to-use members arriving when and where you need them.
Quality Control in Rolling
H-beam rolling is controlled under ISO 9001 with continuous monitoring of flange width, web thickness, depth and camber. Ultrasonic testing is available for heavy sections and for fracture-critical or seismic applications, and each heat is chemically analysed and mechanically tested. Straightness and twist are checked against the standard’s tolerance class, and surface defects such as laps or scabs are dressed before dispatch. This disciplined control is what lets fabricators cut, drill and weld members without unpleasant surprises on the shop floor.
Choosing the Right Section
Selecting an H-beam starts with the load and span: heavier loads and longer spans need deeper, heavier sections. The engineer then checks deflection, buckling and connection capacity, often choosing a standard designation from the relevant national table. For columns, compact and symmetric sections resist bi-axial bending; for beams, the strong axis carries the main moment. When in doubt, share your load summary with us and we will recommend a cost-effective section and confirm its availability from current mill stock.
Worldwide Delivery
Huaxia-Steel exports H-beams in mill lengths or cut-to-length, bundled, tagged and protected for ocean transit. We coordinate container or break-bulk shipment, prepare full customs documentation, and can deliver to port or site under FOB, CFR or CIF terms. For large projects we phase deliveries to match your erection schedule, reducing site inventory and double-handling, and our aim is ready-to-use members arriving exactly when and where your crew needs them.
Engineering and Estimation Help
Beyond supply, we help estimators compare H-beam versus built-up sections, confirm connection details, and size members for deflection and capacity. Sharing your structural model or load tables lets us propose the lightest compliant section and quote it directly, shortening your procurement cycle. For repeated project types we can hold standard sections in stock and release against a framework agreement, giving you price stability and rapid call-off through the whole programme.
Application Fit and Limits
H-beams suit primary structural columns and long-span beams where their wide, parallel flanges give efficient, connectable capacity. They are less ideal for lightly loaded secondary members where a narrower I-beam or channel may be cheaper, and for very long unbraced spans lateral-torsional buckling must be checked. Specifiers should confirm the section against the relevant design code and, for seismic or fatigue cases, review the supplemental requirements. Used within its envelope, the H-beam is the most efficient mass-produced structural shape available.
Ready to Order
To request a quote, send your section sizes, grades, lengths and quantities, and we will confirm availability and lead time from current mill stock. For projects we offer cut-to-length, drilling, welding of connections and phased delivery, plus full export documentation. Huaxia-Steel’s mill-direct H-beam supply combines competitive pricing, certified quality and reliable logistics, making it a practical choice for builders and fabricators across global markets.
Why Source From Huaxia-Steel
Huaxia-Steel supplies H-beams mill-direct in standard and custom sections, with cutting, drilling and fabrication to your drawings and full export documentation. Our ISO 9001-controlled rolling, optional ultrasonic testing and mill test certificates give fabricators confidence, while our phased delivery and stock-holding options smooth large projects. Choosing a mill-direct supplier removes distributor margin and shortens lead times without sacrificing the certification and quality control your structures require.
Related Products and Services
Besides H-beams we supply I-beams, channels, angles, plates and bars across A36, S355JR, SS400 and Q235B/Q355B grades, plus fabrication and coating services. A single coordinated order can cover an entire steel frame, reducing interface risk and administration. Reach out to discuss your structural package and we will propose sections, lead times and a delivery plan aligned with your erection sequence.
Order Lead Time and Minimums
Common H-beam sections are frequently available from rolling schedules with lead times of a few weeks, while special sizes or heavy sections may need longer. Minimums are usually one container or a specified tonnage, and mixed-section loads are routine. For large or repetitive projects we hold stock and release against a framework agreement, aligning delivery with your erection plan. Share your section list and schedule and we will propose availability, lead time and a phased delivery programme that keeps the site supplied.
Practical Procurement Tip
When comparing H-beam offers, ensure the section designation, grade, length tolerance and certificate level are identical, and confirm whether prices are EXW, FOB or CIF so freight and risk are comparable. A slightly higher mill-direct price with full documentation and proper export packing is usually cheaper overall than a bare discount that shifts cost and risk onto your side.
