Carbon Steel Wing Nut — Factory Direct Supplier | Huaxia-Steel
Carbon steel wing nuts, also called butterfly nuts or thumb nuts, are hand-tightened fasteners with two wide “wings” that let you assemble and adjust a joint without tools. Huaxia-Steel manufactures wing nuts in metric and inch sizes, in plain, zinc-plated, and hot-dip galvanized finishes, supplied direct from the factory with full mill traceability. Whether you need a light-duty adjustment nut for a fixture or a robust fastener for industrial equipment, we can match your standard and quantity at a competitive mill-direct price.
Wing nuts are valued for applications that require frequent adjustment or tool-free assembly. The broad wings provide grip for the fingers, allowing quick tightening and loosening by hand. Our production covers the two principal styles — standard stamped wing nuts and stronger forged wing nuts — so you can select the right balance of cost and strength for your job.
Product Overview
A wing nut consists of a central threaded body and two projecting wings formed on either side. The internal thread engages a bolt or stud, and the wings are pinched between the thumb and forefinger to turn the nut. This design eliminates the need for a wrench in applications where the joint is adjusted often or accessed by hand. Carbon steel is the most economical material choice, offering good strength and, with the right coating, adequate corrosion resistance for most environments.
We supply wing nuts from M4 to M24 in metric sizes and from #6 to 1/2 inch in imperial sizes, with coarse and fine threads available. Custom thread lengths, wing shapes, and finishes can be produced to drawing for volume orders.

Specifications
| Parameter | Range / Detail |
|---|---|
| Metric sizes | M4, M5, M6, M8, M10, M12, M16, M20, M24 |
| Imperial sizes | #6, #8, #10, 1/4″, 5/16″, 3/8″, 1/2″ |
| Thread type | Coarse (standard), fine on request |
| Styles | Stamped (light duty), forged (heavy duty) |
| Materials | AISI 1008 / 1010 / 1020 carbon steel |
| Finishes | Plain (oiled), zinc plated, hot-dip galvanized, black oxide |
| Tensile class | Class 4 / 6 / 8 equivalent |
| Standard | DIN 315, ASME B18.6.9, or custom drawing |
Tolerances follow the referenced standard unless otherwise agreed. For customers needing specific thread pitch or wing dimensions, we manufacture strictly to the supplied drawing and can provide first-article inspection reports.
Available Grades and Materials
- Low-carbon steel (AISI 1008-1020): the standard choice, easy to form and thread, suitable for zinc plating.
- Medium-carbon steel (AISI 1035-1045): higher strength for forged wing nuts used on heavy equipment.
- Spring steel variants: available where repeated flexing of the wings is expected.
- Special alloys: on request for corrosive or high-temperature environments.
All material is sourced from certified mills and accompanied by a mill test certificate (EN 10204 3.1) where required. We can also supply material test reports covering chemistry and mechanical properties for critical applications.
Manufacturing Standards
Our stamped wing nuts are produced to DIN 315 (metric) and ASME B18.6.9 (inch) dimensions, formed from steel strip in progressive dies and then tapped. Forged wing nuts are hot-forged from bar stock, trimmed, and machined to produce a stronger one-piece body with more robust wings. Threads are cut or rolled to class 6H (metric) or 2B (inch) as appropriate.
Surface protection is applied after threading. Zinc plating provides a bright, general-purpose finish; hot-dip galvanizing offers heavier corrosion resistance for outdoor and marine-adjacent service; and black oxide gives a dark finish with mild corrosion resistance and an oil-retaining surface.

Applications
- Furniture and display fixtures requiring tool-free assembly.
- Machinery guards, covers, and access panels that are opened frequently.
- Electrical enclosures and junction boxes.
- Laboratory and workshop fixtures and clamps.
- Automotive and transportation components where hand adjustment is useful.
- HVAC dampers and adjustable brackets.
Quality Assurance
Every production lot is sampled for dimensional accuracy, thread gauging, and coating thickness. We inspect wing integrity, checking that the wings are free of cracks and are formed to the specified shape, and we verify that the thread engages smoothly with a mating bolt. Coating adhesion and corrosion resistance are checked by salt-spray testing where specified.
A mill test certificate accompanies material lots, and third-party inspection (SGS, BV, TUV) can be arranged for first orders or critical contracts. Heat-number traceability is maintained from raw material through finished goods.
Packaging and Shipping
Wing nuts are packed in sealed cartons or woven bags, typically 25 kg per carton, with_inner plastic for corrosion protection. Cartons are palletized and stretch-wrapped for container shipment. Small quantities can be packed in labelled boxes to customer specification. We handle export marking and documentation and can consolidate wing nuts with other fastener orders to optimize freight.
Frequently Asked Questions
What is the difference between stamped and forged wing nuts?
Stamped wing nuts are formed from sheet steel and are economical for light-duty, frequent-adjustment applications. Forged wing nuts are made from bar stock and are significantly stronger, suited to heavy equipment and higher clamp loads.
Can wing nuts be tightened to a torque specification?
Wing nuts are designed for hand tightening, so precise torque control is limited. Where a defined torque is critical, use a hex nut with a wrench instead.
Which finish should I choose for outdoor use?
Hot-dip galvanized finish offers the best corrosion resistance for outdoor and marine environments. Zinc plating suits indoor and mildly corrosive settings.
Do you supply custom wing nut designs?
Yes. We can manufacture to your drawing, including custom wing shapes, thread sizes, and materials, subject to minimum order quantity.
What standards do your wing nuts meet?
Standard products follow DIN 315 (metric) or ASME B18.6.9 (inch). We can also produce to other standards or customer specifications on request.
Wing Nut Types Compared
Not all wing nuts are the same. Choosing between the common types depends on the load, the frequency of adjustment, and the environment. The table below summarises the main options so you can select the right fastener for your assembly.
| Type | Manufacture | Strength | Best for |
|---|---|---|---|
| Stamped wing nut | Pressed from steel strip | Light duty | Furniture, covers, light fixtures |
| Forged wing nut | Hot-forged from bar | Heavy duty | Machinery, equipment, high clamp load |
| Cast wing nut | Sand or die cast | Light-medium | Low-cost general use |
| Spring wing nut | Spring steel, self-locking | Vibration service | Applications subject to vibration |
Stamped wing nuts are the economical default and are adequate wherever hand tightening and low loads are the norm. Forged wing nuts cost more but resist deformation at higher clamp loads and survive repeated adjustment better. If the joint is subject to vibration, a spring wing nut or a prevailing-torque feature helps prevent loosening.
Selecting the Right Size and Clamp Load
Wing nut size is defined by the thread it fits, not by the wing span. Select the size to match the bolt diameter and thread pitch, then confirm that the wings provide enough grip for comfortable hand tightening. A nut that is too small for the application is hard to grip; one that is too large adds unnecessary cost and may interfere with nearby components.
Because wing nuts are hand tightened, the achievable clamp load is limited by hand strength — typically far less than a wrench-tightened hex nut. They are therefore suited to applications where the joint is not safety-critical or where a defined torque is not required. For critical joints, use a hex nut and washer and reserve the wing nut for the accessible, adjustable parts of the assembly.
Ordering Information Checklist
- Thread size and pitch (metric M-size or imperial number, coarse or fine).
- Style: stamped, forged, or spring; standard or custom wing shape.
- Material grade and required tensile class.
- Surface finish: plain, zinc plated, hot-dip galvanized, or black oxide.
- Governing standard (DIN 315, ASME B18.6.9) or customer drawing.
- Quantity, packaging preference, and destination port.
Providing this information up front lets us quote accurately and ship quickly. For customers with recurring requirements, we can hold stock against a blanket order and schedule deliveries to match your production plan.
Why Buyers Choose Huaxia-Steel
Our wing nuts are produced from certified carbon steel, formed on controlled tooling, and finished to a consistent standard. We hold common metric and inch sizes in stock, support custom designs to drawing, and can arrange third-party inspection for first orders. With consolidated packing and experience shipping fasteners worldwide, we make it simple to source all your hand-tightened fasteners from one dependable supplier.
Every order is backed by responsive communication and a clear documentation package. Our sales team can help you confirm specifications, select the right grade or finish, and plan delivery to match your production schedule. For repeat customers we hold stock against blanket orders and offer priority scheduling. Contact us with your requirement and experience the advantage of buying factory direct.
All wing nuts are packed with clear size and finish labels so that your receiving team can identify them at a glance, and every shipment includes a packing list that matches the carton contents. This attention to detail may seem minor, but it makes incoming inspection and inventory control faster and reduces the chance of a wrong part reaching the production line.
Request a Quote
Looking for a reliable carbon steel wing nut supplier? Huaxia-Steel offers stamped and forged wing nuts in metric and inch sizes with multiple finishes and mill certificates. Send us your size, quantity, and finish requirement for a factory-direct quote.
Contact our sales team at [email protected] with your specification, quantity, and destination port. We reply with a mill-direct quotation, lead time, and full documentation within one business day.





